Fast Curing pipe repair fibreglass bandage for protects pipework
Product Description
Advantages
- Quick and effective to use
- No mixing – No tools
- Water activated
- Ready for use in 3-5minutes – Cures in 10 minutes
- Suitable for all pipes and surfaces
How to use it
Read thoroughly before opening package
* For best results, abrade the pipe with sandpaper or file and clean the surface . The prepared area should be approximately 3 to 4 times the size of the damaged area.
* Using gloves, remove bandage from the package. Immerse in temperate water for 4-6 seconds.
* Wrap tightly and quickly,using entire roll extend approx. 5 to 8cm above and below the damage area.
* Wet gloves in water,squeeze and mold tape in the direction of the wrap until resin stops foaming and is set.
* Wait 30min for ANSEN Bandage to set rock-hard.
Fast Curing pipe repair fibreglass bandage for protects pipework
HINTS AND TIPS:
* A clean, rough surface helps result in a successful repair.
* After pouch is opened, the bandage will start to set when exposed to moisture in the atmosphere; therefore, it is important to work as quickly as possible.
* ANSEN Bandage has a 3-5 minute work life, with full cure in 30 minutes. Water temperature can affect the bandage cure time. Colder water can result in a slower curing time, warmer water temperatures can result in a faster cure time.
* Large applications may require multiple bandages.
Fast Curing pipe repair fibreglass bandage for protects pipework
